Pumpscart logo

Submersible Dewatering Pumps

Features

  • The internal casting is treated with High solids Epoxy coating, which can improve the anti-corrosion and extend the product lifetime.
  • Standard design, incorporating a dry motor with thermal Auto-cut Protector that prevents the motor from over heating. Equipped with a cast iron motor frame for a faster heat dissipation. As well as an abrasion resistant mechanical seal and an additional oil seal.
  • Water cooled motor to ensure a long life in continuous and intermittent operation, with high efficiency and energy savings.
  •  An exceptional High-lift and suction impeller design, which allows for dewatering of underground or circulating water applications.
  • For above or below surface water applications; the IC pump strainer can be easily removed and replaced with a check valve, which allows for dewatering up to max. 8m deep of underground water and water circulation applications. (W–Well Type)
  • New casing cover, with metric thread bolt hole that is easier for valve and adapter connection.
  •  The chrome steel impeller has been adopted for IC-32B~610, with hardness of HRC 25~30; better anti-corrosion, and extended product lifetime.
  • High solids Epoxy coating prolong metals from corrosion and oxidization.
Category:

Specifications

50Hz

Item Description
Limits
of Use
Liquid Temp.
0~40°C (32~104°F)
Applications
Agriculture irrigation •
Circulating water • Dewatering
Type
Frequency 50Hz
Motor
2P (3000rpm) • Dry Motor
Insulation
Class F (1.5~5HP) • Class H (7.5~10HP)
Protection IP68
Protector Auto-cut
Bearing Ball type
M.seal
Double M.seals
Impeller Close
Material
Outer Cover SUS304
Upper Cover FC200
Motor Frame
SUS304 (1.5HP) • FC200 (2~10HP)
Shaft
SUS403 (1.5~3HP) • SUS304 (5~10HP)
M.seal
CA/CE & SiC/SiC
Casing FC200
Impeller
BC (1.5HP) • Chrome Steel (2~10HP)
Cable
VCT or H07RN-F or SJOW/SOW
Optional
Pumps can be customized to fit specifications

 

60Hz

Item Description
Limits
of Use
Liquid Temp.
0~40°C (32~104°F)
Applications
Agriculture irrigation •
Circulating water • Dewatering
Type
Frequency 60Hz
Motor
2P (3600rpm) • Dry Motor
Insulation
Class F (1.5~5HP) • Class H (7.5~10HP)
Protection IP68
Protector Auto-cut
Bearing Ball type
M.seal
Double M.seals
Impeller Close
Material
Outer Cover SUS304
Upper Cover FC200
Motor Frame
SUS304 (1.5HP) • FC200 (2~10HP)
Shaft
SUS403 (1.5~3HP) • SUS304 (5~10HP)
M.seal
CA/CE & SiC/SiC
Casing FC200
Impeller
BC (1.5HP) • Chrome Steel (2~10HP)
Cable
VCT or H07RN-F or SJOW/SOW
Optional
Pumps can be customized to fit specifications

Application

● Aquiculture water supply and drainage.

● Water supply for agricultural irrigation systems and underground water pumping.

● Landscape, water feature and horticulture irrigation.

● Extraction of water from rivers, lakes and reservoirs.