Pumpscart logo

J Series – Submersible Ejector Pumps

Features

  •  Special Mix Chamber design – Provides maximum air suction and produces the maximum amount of small air bubbles, which increases the rate of oxygen supply.
  • High Efficiency Sewage Impeller design – Suitable for most all sewage environments.The Jet pump is equipped with strainer which prevent solids to block water flow.
  • Submersible aerator design – The Jet pump runs very quietly while submerged in the water and you can also install the silencer on the air suction pipe to decrease any noise levels. The Jet pump design can save the cost of construction of a silencer room which is required with a surface blower.
  • One set of ejector is equipped with one piece of expansion pipe. Expansion pipe is made of PVC which provide good resistance to corrosion.
  • Simple Construction – Easy to install and operate, with no need to install complex piping. It can be used with our GRS (guide rail system) for ease of installation and maintenance.
Category:

Specifications

50Hz

Item Description
Limits
of Use
Liquid Temp.
0~40°C(32~104°F)
Applications
Waste Water • Sewage • Industrial Waste Water
Type
Frequency 50Hz
Motor
2P (3000rpm) / 4P(1500rpm) • Dry Motor
Insulation
Class B(1HP) •
Class F(2~5HP) • Class H(7.5~10HP)
Protection IP68
Protector Auto-cut
Bearing Ball type
M.seal
Double M.seals
Impeller
Vortex • Open • Channel
Material
Upper Cover FC200
Motor Frame
SUS304 • FC200(JP)
Shaft
SUS410(1HP) • SUS403(2~5HP)• SUS420J2(7.5~10HP)
M.seal
CA/CE & SiC/SiC
Casing FC200
Impeller FC200
Cable
VCT or H07RN-F or SJOW/SOW
Aerator
Air Inlet Chamber FC200
Nozzle SUS304
Diffuser
PVC(1~5HP) • SS400(7.5~10HP)
Optional
Pumps can be customized to fit specifications

60Hz

Item Description
Limits
of Use
Liquid Temp.
0~40°C(32~104°F)
Applications
Waste Water • Sewage • Industrial Waste Water
Type
Frequency 60Hz
Motor
2P (3600rpm) / 4P(1800rpm) • Dry Motor
Insulation
Class B(1HP) •
Class F(2~5HP) • Class H(7.5~10HP)
Protection IP68
Protector Auto-cut
Bearing Ball type
M.seal
Double M.seals
Impeller
Vortex • Open • Channel
Material
Upper Cover FC200
Motor Frame
SUS304 • FC200(JP)
Shaft
SUS410(1HP) • SUS403(2~5HP)• SUS420J2(7.5~10HP)
M.seal
CA/CE & SiC/SiC
Casing FC200
Impeller FC200
Cable
VCT or H07RN-F or SJOW/SOW
Aerator
Air Inlet Chamber FC200
Nozzle SUS304
Diffuser
PVC(1~5HP) • SS400(7.5~10HP)
Optional
Pumps can be customized to fit specifications

Application

● Living wastewater, manholes, stock farms, wastewater treatment, supplies the oxygen to a slurry treatment tank.
● To produce the water current in fountain pools or water tanks to help avoid accumulation and decay on the bottom of tank and pool.

● Aquaculture farm, oxygen supply for water tank.