Pumps for Power Plant Industry

Pumpscart pumps’ ability to handle abrasive substances, and efficiently pump the tough ones make them particularly useful for applications in the Pumps for Power Plant Industry in India.

Pumpscart is the prominent supplier and exporter of Pumps for Power Plant Industry in India. Power Plant Industry supplier in India. A power plant is an industrial facility that generates electricity from primary energy. Most power plants use one or more generators that convert mechanical energy into electrical energy in order to supply power to the electrical grid for society’s electrical needs. Nuclear power plant. Wind power farm. Most power plants use one or more generators that convert mechanical energy into electrical energy in order to supply power to the electrical grid for society’s electrical needs.

Types of Power Plant Pumps

Condensate pumps

Condensate pumps collect saturated water from the condenser hot well and pump it either to a de-aerating heater or back into the boiler feed pump. These pumps operate at extremely low suction pressures. They are often located at the lowest level of any pump in the power plant. 

Condenser circulating pumps

Condenser circulating pumps deliver cool water from freshwater sources near the power plant. They then pump it through the condenser to condense exhaust steam from the turbine. These pumps can be either located in dry pits or wet pits. If they are in wet pits they will have a vertical design.

Boiler circulating pumps

Boiler circulating pumps pump water through a boiler. This helps to increase the effectiveness of the boiler. The water is at the same temperature and pressure as the boiler and the pump operates at a low total head requirement. It only needs to overcome the friction in the tubes of the boiler.

Brands

FAQ

Pumps and pumping systems are used in power plants for primary applications such as fuel oil handling and for auxiliary systems such as lubrication and cooling. Of the two, engineers are generally more familiar with centrifugal pumps, which use an impeller to move fluid through the application process.

This pump is necessary for protection of the cooling pipe of the furnace. It circulates water in the cooling pipe of the furnace when starting the operation and at low load and always maintains the flow in the pipe approximately at a fixed speed.

A boiler feedwater pump is a specific type of pump used to pump feedwater into a steam boiler. The water may be freshly supplied or returning condensate produced as a result of the condensation of the steam produced by the boiler.

Industrial Pumps India
Logo
Enable registration in settings - general
Industrial Pumps India
Logo
Enable registration in settings - general